Do More with More Suspension
Driving in rough terrain is one thing. Pushing your Defender to its limits in rough terrain is another. Can your stock A-arms keep up? We know our Atlas Pro 1.5 Rear Offset A-Arms can. Their tubing is bigger and better, measuring 1.5 in diameter. Theyre also 0.5 larger than stock and 0.25 larger than our standard A-arms. They amplify your clearance, making your rig look big, bad, and powerful. Plus, they come with a 1.5 offset. And if you want to run 31 tires all the way around, you can add our 2 forward offset A-arms.

Atlas Pro Tubes Are Badass
These Atlas Pro A-arms are large and beefy. Theyre the biggest A-arms we have ever designed. The enlarged 1.5 diameter tubing will turn heads. And while youre on the trail, it gives you the strength you need and the reliability you count on. Half an inch bigger than stock may not sound big, but the difference is huge when it comes to A-arms. Plus, we finish them with a UV-resistant powder coating to increase durability and corrosion resistance.

Rear Offset = More Stability
The design of these Can-Am Defender HD10 control arms gives you an additional 1.5″ of ground clearance, allowing you to ride over stumps and rocks youd pass up in the past. And they come with a 1.5 rear offset, adding length to your wheelbase by moving the ball joint 1.5″ backward. The offset allows you to run up to 31 tires without adding a lift kit. The trail is at your mercy with larger tires, more ground clearance, and a 1.5 offset.

We’re so confident in our A-arms that we’re selling them with a lifetime warranty. So ride how you want, knowing we’ve got your back.

Adjustable Pivot Blocks
Our high-clearance A-arms also come with adjustable pivot blocks, giving you the ability to change your camber. Its important when adding a lift kit or larger tires that you pay attention to your camber to eliminate premature wear and tear on your tires. To keep the stress off you, weve also pre-adjusted your pivot blocks to match your machine’s stock specifications, so you dont have to mess with them if you dont want to.

WARNING:This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine’s operation.

California Proposition 65 Warning
WARNING:This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Features:

• Adds 1.5 of rear offset
• Fit up to 31 tires
• Made with 1.5 diameter tubing
• 0.5 larger than stock
• 0.25 larger than our standardHigh-Clearance 2 Rear Offset A-Arms
• Adjustable pivot blocks for full camber adjustability
• Utilizes stock A-arm bushings
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

VEHICLE FITMENT

• Can-Am Defender HD 10 DPS : 2020+
• Can-Am Defender HD 10 XT : 2020+
• Can-Am Defender MAX HD 10 DPS : 2020+
• Can-Am Defender MAX HD 10 XT : 2020+
• Can-Am Defender 6×6 DPS : 2020+
• Can-Am Defender 6×6 XT : 2020+
• Can-Am Defender Pro DPS : 2020+
• Can-Am Defender Pro XT : 2020+

NOTE:Does NOT fit LTD, Lonestar, or XMR models.

INSTALLATION

• Instructions – AA-CA-DEF-R-OHC
• Instructions – AA-CA-DEF-1.5-R