The standard 6-11psi wastegate kit is adjustable from 6psi to 11psi with the installed spring and also includes an optional 9-15psi spring. This works excellent for those needing a little more crack pressure than can be achieved with the OEM wastegate, especially in higher altitudes.

The 6-11 psi wastegate spring that comes in the actuator kit allows you to easily adjust for those running our tunes that require the crack pressure to be at 6-11psi.

Factory crack pressure is 6psi (2017 X3 models) and 7-8psi (2018+ X3 models) and unlike others on the market, this actuator kit can be set to a true stock PSI setting so you don’t get over boost when setting up your wastegate on a stock X3.

Great replacement for your worn out wastegate actuator. As springs age and with more run time, they wear out. This may cause a low boost condition resulting in less power and more heat created.

We also have a 14-18psi wastegate spring that can be sold separately if needed. This should only be used for custom applications where the tune is built for the higher pressure actuator.

Features:

• Easy to adjust crack pressure when or if needed.
• Installation is easy and normally takes 15-20 minutes.

NOTES:

• We highly suggest adding our wastegate pressure pump to properly set this valve up to the correct crack pressure
• If running AA tunes, see the tune product description as it will list proper crack pressure needed with tunes

VEHICLE FITMENT

Can Am X3 Turbo

INSTALLATION

Instructions