Displacement increase over stock:36
Geometric displacement: 1.22 cc/revMax Operating Pressure: 250 bar (requires optional Nostrum E460-1579 rail pressure sensor upgrade / 190 bar with stock sensor
Tune required?: Yes

What sets Nostrum apart:

• Fully laser welded HPFP construction
• Direct bolt-on kit
  
• Uses stock low-pressure feed line
• 36% HPFP flow rate increase over stock
• 36% injector flow rate increase over stock
• 240 Bar capable with theoptional pressure sensor!
• 100% dynamically tested
• Limited lifetime warranty

The 2 liter Ecoboost found in the Focus ST has a lot of potential, but is held back from making any real additional power by an inadequate factory fuel system. The Nostrum HPFP is the solution!

Nostrums HPFP for the Ecoboost 2.0 is capable of flowing 36% more fuel than the factory fuel pump. The additional fuel flow allows you to dial in more boost earlier, resulting in a substantial increase in low end torque. Being that our pumps are ethanol compatible, you also have the added benefit of being able to run e85 or blended ethanol fuel. Running ethanol is one of the best things you can do for your turbo car, as it has a higher octane rating and is less prone to knock than 91/93 pump gas, and you have the potential to make more power as a result. We offer tuning support for Cobb, HP Tuners and SCT software.

Complete your fuel system upgrades by bundling in a set of our High Flow Ecoboost injectors! These are the same great injectors that are already proven and making power on the Focus RS and Ecoboost Mustang platforms! Flowing 36% more than the stock Focus ST injector, our High Flow injectors give you more than enough headroom for whatever your power level goals are!

Nostrum backs every part we sell with a limited lifetime warranty. All Nostrum products come complete with everything you need inside the box, including detailed installation instructions. Tuning guides are also available for your dealer or tuner. We have customer service and calibration engineers on staff to provide you with any support that you may need, from installation to tuning.

What comes in the box:

• 1050-250 High Pressure Fuel Pump – fully welded, stainless steel construction
• Pump mounting flange
• Installation hardware
• Flange alignment tool
• Protective caps
• Install Guide provided in print

Vehicle applications:

• (15-18)FordFocus ST*
  (2013 & 14 Focus ST still pending calibration validation)

Recommended tuner:

• PHUL Performance
• Dizzy Tuning
• Stratified Automotive Controls
• Panda Motorworks
• Tunewerks